Product ID:STAFOAM AA402,COMPONENT R(2 PART KIT:B)
MSDS Date:01/01/1987
FSC:9330
NIIN:01-033-9756
Kit Part:Y
MSDS Number: BGGGL

Emergency Phone: 213-324-6692/213-321-4260

Info Phone: SAME

Cage: 25598

Telephone: 310-321-4260

Cage: 25598

POLYETHER POLYOLS

Fraction By Weight: >95%.

TETRAMETHYLBUTANEDIAMINE

Fraction By Weight: <3%

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SYSTEM EFFECTS MAY RESULT FROM
INGESTION OF SMALL QUANTITIES.
Effects of Overexposure:IRRITATION OF UPPER RESPIRATORY TRACT, SKIN
IRRITATION.
Medical Cond Aggravated by Exposure:RESPIRATORY CONDITIONS. SKIN
SENSITIVITY

First Aid:INGEST:GIVE LARGE AMOUNTS OF SALT WATER. INDUCE VOMITING
UNTIL VOMIT IS CLEAR; EYES:FLUSH W/WATER FOR 15 MIN.-GET MEDICAL
ATTN.; SKIN:WASH W/SOAP & PLENTY OF WARM WATER.

Flash Point Method:PMCC
Flash Point:200F/93.3C
Extinguishing Media:WATER FOG, FOAM, CO*2, DRY CHEMICAL
Fire Fighting Procedures:FIREFIGHTERS MUST WEAR "SELF-CONTAINED
BREATHING APPARATUS" & PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:OXIDES OF CARBON & NITROGEN WILL BE
GENERATED.

Spill Release Procedures:USE OIL ABSORBING COMPOUND & FLUSH AREA W/HOT
WATER.

Handling and Storage Precautions:STORE MATERIAL IN TIGHTLY CLOSED
CONTAINERS IN AREAS WHERE TEMPERATURE DOES NOT EXCEED 120F/48.9C.
Other Precautions:SHOWER & EYE WASH STATIONS MUST BE AVAILABLE.

Respiratory Protection:WHEN MATERIAL IS HOT, USE RESPIRATOR
W/CARTRIDGES FOR ORGANIC VAPORS.
Ventilation:GENERAL MECHANICAL REQUIRED
Protective Gloves:CHEMICAL RESISTANT RUBBER OR PLASTIC
Eye Protection:GOGGLES OR FACE MASK
Other Protective Equipment:NONE; AS REQUIRED TO MINIMIZE EXPOSURE(FP
(D) ).
Work Hygienic Practices:DO NOT EAT, DRINK, OR SMOKE IN WORKING AREAS.
KEEP CLOTHING & EQUIPMENT CLEAN AT ALL TIMES.
Supplemental Safety and Health
LIZ01.KEY1:N1.

HCC:T2
Boiling Pt:B.P. Text:DECOMPOSES
Vapor Pres:LOW
Spec Gravity:1.05
Evaporation Rate & Reference:NIL
Solubility in Water:SOLUBLE
Appearance and Odor:CLEAR, LOW VISCOSITY LIQUID. VERY MILD ODOR

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS, ACIDS, & ISOCYANATES
Stability Condition to Avoid:STORAGE TEMPERATURES ABOVE 120F/48.9C
Hazardous Decomposition Products:OXIDES OF CARBON & NITROGEN

Waste Disposal Methods:FOLLOW FEDERAL, STATE, & LOCAL ENVIRONMENTAL
CONTROL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.